Accessory

EXTERNAL CELL HOLDER

The external cell holder is useful when the spectrophotometer does not have an internal cell holder or when measurements with cells are to be made at some distance from the spectrophotometer e.g. in a fume hood. To connect this cell holder properly to your system you will require 2 x 1m fiber optic cables in the corresponding spectral range. You should select the option "SMA-Collimator".

MaterialAluminium, Black Anodised
Dimensions123 mm x 40 mm x 45 mm
Temperature of
solution in cell
Max. 120 °C (Quartz Cells Only)
Fiber Optic CablesThese must be ordered separately
NotesSuitable for cells with path length
1 mm to 20 mm
Article-No.664-15-71

FIBER OPTIC CABLES

Fiber optic cables can be supplied with either SMA
connectors or special collimating lenses
to suit the application that they are being used for.





Core Diameter600 µm
Numerical Aperture0,22
Beam Diameter (lens)3,7 mm
Max. Temperature150 °C


Please click on the table below to choose
your fiber optic cable:
















FIBER OPTIC INTERFACE

This accessory is to be used when
SMA sockets are not available
on your spectrophotometer. To connect this interface properly to your system you will require, in addition to your probe, 2 x 1m fiber optic cables in the corresponding spectral range. You should select the option "SMA-Collimator". The SMA end is connected to your probe via a small SMA/SMA adapter and the collimating ends are plugged into the interface.






Effective Aperture4 mm Diameter
Outside Dimension60 mm x 12,5 mm x 12,5 mm
Center Height8,5/15/20 mm
Wavelength Range190 nm to 2300 nm,
depends on cables used
NotesOther center heights on request
Article-No.662-85-UVNIR-46
662-15-UVNIR-46
662-20-UVNIR-46

Please order the necessary SMA/SMA adapter for free:
Article-No. 041-500-74

}